Electrical engineering is a field that is going to call for many job opportunities in near future.
You can get your hand on various concepts of related field. You can choose from various branches of
studies according to interest such as Electrical system design course, substantial design course,
transformer course and electrical QA and QC course. These courses can provide you a higher post
within premises with better salary and job assurance. These courses help you learn the usage of designs
to create, convey and manipulate information. We make you master electrical engineers in telecommunications, a
utomation, control, and microelectronics. The basic objective of this job-oriented course is to facilitate skill
enhancement for better career growth and placements.
Electrical design has a huge demand in many segments like Design, Manufacture and Installation of Power and Distribution system, Sub-Station Design, Commercial and Domestic Interior lighting, Selection of protective device, CCTV system design fire alarm system.
It has a great scope and career in various fields like Airports, Commercial Buildings, Pharmaceutical Industry, Installation of Power and Distribution Systems.
But due to lack of good engineering design institute in India student could not get the knowledge of electrical design. So we decided to start a formal training of this course at Advance education group which is a government certified skill development academy.
Here we provide practical engineering courses for the fresher and we offer the best quality education and skill development to the students and faculty is well trained and gives exposure for various verticals of the electrical system design.
Here we try to provide more practical knowledge so that the student can work under any circumstances and meet the demands of rapidly growing industry, it enhances their skills to a level where they can easily handle any system design related issue in no time. In our institute we provide hardcore training to the students where they can understand even the very small things possible in a design.
We are always there to support you in a right direction so that you can shine in your future and achieve practical knowledge so that you get a vision to think out of the box and achieve the target.
Module-1 System planning
- Basic design considerations
- Planning guide for the supply and distribution system
- Power system modernization and evaluation studies/programs
- Voltage considerations
- Voltage control in electric power systems
- Voltage selection
- Voltage ratings for low-voltage utilization equipment
- Voltage drop considerations in locating the low-voltage/ high-voltage
- Calculation of voltage drops
Module-2 Cost estimating of industrial power systems
- Preparing the cost estimate
- Classes of estimates
- Equipment and material costs
- installation costs
- Other costs
Module-3 LIGHTING DESIGN
- Different entities of illuminating systems
- Light sources: daylight, incandescent, electric discharge, fluorescent, arc lamp and Lasers
- Luminaries, wiring, switching & control circuits
- Laws of illumination; illumination from point, line and surface sources Photometry and spectrophotometry
- Interior lighting – industrial, residential, office departmental stores, indoor stadium, theater and hospitals.
- Exterior lighting- flood, street, aviation and transport lighting, lighting for displays and signaling- neon signs, LED-LCD displays beacons and lighting for surveillance
- Utility services for large building/office complex & layout of different meters and protection units
- Different type of loads and their individual protections
- Selection of cable/wire sizes; potential sources of fire hazards and precautions.
- Prepare layout of Different type lights
- Refer Std:- IES(illumination Engineering Society )
- IES (illumination Engineering Society)
- IS 3646Code of Practice for Interior Illumination
- IEC62504 General Lighting — LEDs and LED Modules —terms and definitions
- National Lighting Code (Nlc)-2010
- IS 6665 Code of Practice forIndustrial Lighting
- IS 1944 Code of Practice for Lighting of public Thoroughfares
- IEC 60598-2-3 Particular requirements – Luminaires for road and street lighting
Module-4 Cable Sizing and Selection of single Phase and Three Phase
- Load Details Calculation
- Cable type and Construction features
- Site Installation Conditions
- Cable Selection Based on Current Rating of feeder
- Base Current Ratings of feeder
- Installed Current Ratings of Cable
- Cable Selection and Coordination with Protective Devices
- Feeders load detail
- Motors load detail
- Voltage Drop of cable
- Cable Impedances
- Maximum Permissible Voltage Drop by ANSI and IEC std.
- Calculating Maximum Cable Length due to Voltage Drop
- Short Circuit Temperature Rise calculation of cable
- selection Minimum Cable Size Due to Short Circuit Temperature Rise
- Initial and Final Conductor Temperatures withstand capability of cable
Ref.Std.IEC
- IEC 60364-5-52:election and erection of electrical equipment –Wiring systems
- IEC 60364-5-54:Selection and erection of electrical equipment –Earthing arrangements, protective conductors and protective bonding conductors
- IEC 60502-2: Power cables with extruded insulation and their accessories for rated voltages from 6kV up to 30kV
- IS 7098 (Part 2)-1985:Specification for Cross-linked polyethylene insulated PVC sheathed cables–Specification (3.3kV to 33kV).
- IS 1255:Code of practice for installation and maintenance of power cablesup to and including 33 kV rating
Module-5 Internal Electrification design
- Electrical Layout in residential building using Auto CAD
- Selection of house wiring
- Sizing and Selection of Conduit
- Sizing and selection of Switch Socket
- Calculation of load on circuit
- Design of sub circuit (Lighting Circuit and Power Circuit)
- Distribution of Power Circuit
- Calculation of fan
- Calculation of Earthing for residential buildings
- Sizing and selection of low voltage switchgears (MCB,MCCB, RCB, RCBO MPCB)
Refer Std. IS 4648,CPWD
Module-6 PROTECTION OF BUILDINGS AND ALLIED STRUCTURES AGAINST LIGHTNING
- Method of Lightening protection
- Basic Consideration for Protection
- Calculations for Evaluating the Need for Protection
- Calculation of Protective Angles And Zone Of Protection For Various
Forms of Air Termination
- Selection of lightening protection device
- Selection of ESE type Lightening Protection
Rfer Std.
IS 2309,NFC 72-102
Module-7 Earthing Design and Calculation of Power Plants
GENERAL GUIDELINES
- Factors Influencing The Choice Of Earthed And Unearthed Systems
- System Earthing &Equipment EarthingConnections To Earth
- Resistance to Earth and Earth Electrode Current Density at The Surface of an Earth Electrode
- Selection of an Earthing Conductor and Connection af an Electrode
- Chemical Earthing Calculation
- Voltage Gradient around Earth Electrodes
- Connections to Earth Electrodes — Earthing And Protective Conductors
- Earthing Arrangement for Protective Purposes
- Earthing Arrangement for Functional Purposes
- Earthing Arrangements For Combined Protective And Functional Purposes
- Equipotential Bonding Conductors
- Typical Schematic of Earthing And Protective Conductors
- Earthing In Power Stations And Substations
- Earthing Associated With Overhead Power Lines
- Calculation of Earth Fault Currents
- Measurement of Earth Resistivity
- Measurement of Earth Electrode Resistance
- Measurement of Earth Loop Impedance
- Equipotential Bonding Conductors
Earhing Calculation For Switchyard And Power Plants
- Step Voltage,Touch Voltage
- Design Procedure
- Calculation of Maximum Step And Mesh Voltages
- Refinement of Preliminary Design
- Application of Equations For EmAndesUse of Computer Analysis In Grid Design
- Std. Ref. IS, IEC. IEEE, BS
- IEEE Std 80-2000 Guide for Safetyin AC Substation Grounding.
- BS 7430 Code of practice forEarthing
- IS : 3043Code of Practice for Earthing
Module-8 DESIGN AND ENGINEERING OF TRANSMISSION LINE
-
Transmission Planning
- Indian Electricity Rules and State Regulations for transmission line
- Choice of Route of transmission line
- Selection of conductors for Overhead transmission
- Spacing of Conductors in transmission lines
- Calculation of SAG and Tension
- Overhead transmission line Clearance
- Selection of structure Pole, Lattice, Tower
- Survey of transmission line upto 220KV
- Sag Template and Tower Spotting
- Classification of soil of Soil for 220KV transmission line
- Tower Erection at Site Condition
- Choice of Spans for 440kV transmission
- Transmission line Earthing Calculation
- Selection of Transmission line Insulator and fittings
- Overhead transmission line lightning Calculation
- Transmission line maintaince and erection solution
Module-9 DESIGN AND ENGINEERING OF SWITCHYARD
- Light Design Software Like: CG-LUX,DAILUX AND HAVEL LIGHTING
-
Substation Software : Power System Software
- Drafting Software
Regular Batch
Duration: Two Months
Schedule : Monday to Friday
Weekend Batch
Duration: Two Months
Schedule: Saturday and Sunday
Only Sunday Batch
Duration:Three Months
Schedule: Sunday
Our Latest Discount
New Batch Schedule 
Contact Us